Kool Tak Fabulously-Fall Blog Hop – Felt Pumpkin Pillow

I am delighted to be a part of the Kool Tak Fabulously-Fall Blog Hop sponsored by Crafty KT.  With fall around the corner, I decided to make a pumpkin felt pillow. There are 12 of us in the hop, so hop to see all the really “Kool” projects.

Crafty KT is also offering a giveaway of an assortment of Kool Tak products. See the details below on the products in this giveaway as well as how to enter to win.

Felt Pumpkin no sew pillow Phyllis Dobbs

 

This 9″ square pumpkin pillow is a no-sew project, except for a few simple embroidery stitches, and is very easy to make.

Materials needed:

  • Felt – dark green, light green and orange (National Nonwovens felt).
  • Dark orange 6-strand embroidery floss (Sullivans)
  • Kool Tak™ 1 Layer Perfect Tool
  • Kool Tak™ 1 Shiny Transfer Foil Sheets (Earth Tones)
  • Kool Tak™ Clear Foam tape ¼ x ¼ x 1/32” thick
  • Kool Tak™ Clear Foam tape 3/16 x 1/16 thick by 1.6 yards
  • Kool Tak™ Premium EXTREME tape 2 ½ x 27 yards
  • Batting or fiberfil
  • Embroidery needle

Instructions:

1. Divide the 6 strands of embroidery floss and use 3 strands. Sew long running stitches for the vertical “pumpkin lines”.  (See the finished pillow – I forgot to stitch the lines until after step 4.  Its a lot easier to stitch before the adhesive tape is added!)

2. Cut the felt:  dark green – 2 pieces 9″ square; light green – 1 piece 6″ square; orange – a 4″ x 4″pumpkin (download Pumpkin applique pattern ).  From the dark green, cut a stem for the pumpkin.

3.  Use the Premium EXTREME tape on backside of the pumpkin to attach it to the light green piece of felt. After adhering strips of the tape on the back of the pumpkin, trim the edges to align with the pumpkin.

Pumpkin with the tape on the back

4.  Remove the paper backing from the tape and use the Layer Perfect tool to align the pumpkin onto the light green felt. Place some of the Premium Extreme tape to the back of the pumpkin stem and trim to match the stem. Remove the paper backing and adhere the stem above the pumpkin center.

Centering the felt pumpkin to the light green felt background

 

5.  Attach strips of the 1/16″ Clear Foam Tape 1/2″ from the edge of the green felt, forming a square going around the pumpkin.  Remove the liner from the tape and rub the gold Shiny Transfer Foil Sheet over the adhesive tape. Repeat to foil the foam tape square with the gold surface.

Pumpkin felt pillow with gold foil

6.  Attach the Premium Extreme tape to the back of the light green square. Remove paper backing and adhere the light green square centered to one of the dark green squares.

7.  Adhere a 1/4″ foam clear adhesive pad to the dark green square at the corners of the light green piece and half way between the corners. Remove the liner pieces from the foam squares and rub the gold Shiny Transfer Foil Sheet over the squares.

8.  Align the dark green pumpkin pillow top to the remaining green felt square and pin around 3 sides. Sew edges with a running stitch using 3 strands of the floss. Leave the 4th side open. Fill the pillow with fiberfil then finish sewing the pillow closed.

Click on the blue Designer Crafts button in my sidebar to hop back and forward to other blogs with fabulous projects in this hop!

Blog Hop Giveaway Crafty KT Kool Tac

And be sure to sign up for the Crafty KT newsletter to be entered for the giveaway $70 in Kool Tak products including:

  • Kool Tak™ 1 Layer Perfect (Use it for centering, piercing, and edge stitching) Tool
  • Kool Tak™ 1 Shiny Transfer Foil Sheets (Earth Tones)
  • Kool Tak™ Clear Foam tape ¼ x ¼ x 1/32” thick
  • Kool Tak™ Clear Foam tape 3/16 x 1/16 thick by 1.6 yards
  • Kool Tak™ Premium EXTREME 2 ½ x 27 yards
  • *the giveaway is open only to the mainland residents of the US

Thanks for visiting and enjoy hopping to all the other crafty fall projects.

Phyllis

Blog Widget by LinkWithin